Hikvision DS-K2604 Four-Door Controller Board Network Access Controller (OPENBOX)

DS-K2604
Network Access Controller

Hikvision’s DS-K2600 Series access controllers are designed with the latest communication protocols such as TCP/IP and RS-485 interfaces. The communication data is encrypted to improve the system security. The controller also supports offline operation and is designed with a tamper-proof switch.  RS-485 and Wiegand card reader interfaces enable this device to read up to 100,000 cards and capture up to 300,000 events. Card reading is expandable to up to 300,000 cards, and event capturing is expandable to 600,000 events. Communication data on this network access controller is encrypted for system security. A fire relay connects with a third-party fire alarm system and cuts off power to release doors without software linkage. The controller integrates with an NVR/DVR to send alarm notifications and trigger event recording and playback on a local monitor. A tamperproof switch provides an additional layer of security.

• RS-485, Wiegand (W26/W34)
• Cards information:100,000 (200,000 expandable) access control events :300,000 (600,000 expandable)
• 8 card readers (RS-485 interface) 4 card readers (Wiegand interface)
• Alarm input × 4, door sensor × 1, exit button × 1, case input × 2, tamper alarm × 1
• Power Dissipation ≤4 W
• -4°to140°F(-20°to60°C)
• 10% to 90% (non-condensing)
• 4.6"x 13.6"x 3.5" (370mm x 345mm x 90 mm)
• TCP/IP Network Communication, w/Self-Adaptive Network Interface
• Encrypted Communication Data
• 100,000 (Expand to 200,000) Card Info, 300,000 (Expand to 600,000) Access Control Events
• Multi-Door Interlocking (DS-K2602 and DS-K2604), Anti-Passback, Multi-Card, First Card, Super Card, and Super Password
• Zone Alarm Input
• RS-485 and Wiegand Card Reader Interfaces